The correct sized cover for your 16'8" Lance 855 truck bed camper is the Camco UltraGuard Slide-In Camper Cover # CAM45770 which is designed to fit truck bed campers up to 18'2" long.
This has self-adjusting hold-down straps so you can fit it better to the body of your camper and not have as much slack. view full answer...
For a better cover than the Camco UltraGuard Slide-In Camper Cover # CAM45773 you originally purchased, I recommend the following for your 19' 2018 Lance 975 Truck Camper:
- Classic Accessories PolyPro III Deluxe RV Cover # CA80037
This cover is backed by a 3-year warranty as opposed to the 2-year from Camco, which goes to show the confidence Classic Accessories places in their product. It's also important to note that all storage covers tend to be a sort of fragile so it's good to put... view full answer...
There's not an option to upgrade just the converter on your power center if you are wanting to use lithium batteries. I say this because most people who upgrade their converters on the Magnetec series 6300 do so to change over to lithium batteries.
The best option is the only option and that is to replace your entire power center with the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger item # PD4135K. This 2-in-1 AC/DC distribution panel and converter... view full answer...
Thanks for reaching out about this product.
The Camco UltraGuard Slide-In Camper Cover - 16-1/2' Long # CAM45771 does have integrated zippers to help you access your truck camper.
However they are on the corners and, to me, seem to be more of a hassle.
I would recommend the Adco SFS AquaShed Truck Camper Cover - 16' Long - Gray # 290-12262. It has an easier way to access the back door and they are higher quality.
That said they are still made of fabric and no matter what you decide... view full answer...
You'll want a heavy-duty cover for your 2017 Lance 975 truck camper to withstand the soggy winter weather, and the best option that fits your camper is from Camco:
- Camco UltraGuard Slide-In Camper Cover - 19-1/2' Long # CAM45773
The UltraGuard # CAM45773 is designed to withstand a great deal of moisture, be it rain or snow, due to its top being triple-layered. It is also vented so that the wind can pass through without added stress on the cover, and it has adjustable hold down straps... view full answer...
Most people when using the A7735 Tork Lift Extended Power Battery Mount # TLA7735 they would charge them for the vehicle's 7-way 12 volt accessory circuit. Which this is the pin in the 1:00 position so you'd need to run a length of 10 gauge wire like part # 10-1-1 from this pin to the positive post of both batteries to put a maintenance charge on them. view full answer...
You'd want to go with a cover that is slightly longer than what your camper is so since yours is 15-1/2 feet in length the Camco UltraGuard part # CAM45771 would be what you'd need as it fits up to 16-1/2 feet in length. view full answer...
The Replacement Jack Crank Hub Cap for HappiJac Camper Jack System # LC34HD that you referenced is sold individually. If you needed 4 you'd need to order a quantity of 4. view full answer...
To install the Ventline Ventadome Trailer Roof Vent, # V2092SP-28 in the clamp-in installation option, you will need the four (4) VB0492 clips that are purchased separately. This is not an item that we carry. Even though the manufacturer has this as an installation option, we highly recommend using the more common and proven method of using screws. We carry the Roof Vent Installation Kit, # 344270KITW that contains sealant, Butyl tape and screws. And we have a very thorough installation... view full answer...
Based on the pictures you provided it looks like you have an older Ventline manual vent with a fan so the Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan # V3094-601-00 you were looking at would just be the newest version and would make a great replacement if you're happy with a manual vent over a powered one.
To replace your current vent you'll need to scrape off the old sealant first. I recommend using a composite tool like # PT73HJ and really taking your time so that you don't... view full answer...
The start capacitor # ACMSCKIT included with the Advent Air # ACM135C will drop the starting wattage down to approximately 1,800 watts with a 1,450 running wattage so your Champion generator # CH34FR with 2,500w surge rating and 1,850w running wattage will be enough to handle the demand.
If you plan on powering more items in your trailer then you can use the Parallel Kit # CH74FR and another # CH34FR to double your available wattage. view full answer...
While we don't know for sure if the SnapPad Mini Jack Pads part # SN39FR will fit your 2019 Lance Model 1062 if you can measure the feet of your jacks now it should be pretty easy to figure out. If your feet are 5-1/2 inches square these will work. If you have a different size let me know or check out the attached link to see all of the options we have where you can select your foot size from the drop down menu. view full answer...
What's the entry height of your Lance? I am sure we have a set of the Torklift Glowsteps that will work but we need to know for sure the entry height to pick out right size. For example, the part # TLA7844 fits the height range of 31-42 inches.
And the part # TLA7845 fits the height range of 38-1/2" - 50". view full answer...
Heating pads such as the # 277-000164 are designed for 29 to 40 gallon tanks which are much larger than the tanks on your Lance 650 truck camper. My fear is that they could possibly get too hot and damage the tank.
From what you describe, a solution such as a self-regulating heating cable such as the Valterra # W01-1573 for a 25 foot or # W01-1574 for a 50 foot length would be your best bet. The cables operate on 120V AC power, so you'll need an inverter like # DU89FR to power them.
I've... view full answer...
We have the Swagman Roamer LT camper shell roof rack part # S80510 which would work great on your Lance 855S camper but this is a universal style roof rack that would require drilling. We don't have anything custom fit for your camper at this time. view full answer...
The length I'm seeing for a 2018 Lance 650 truck bed camper is 15'6" so the Camco UltraGuard Slide-In Camper Cover - 16-1/2' Long # CAM45771 would be closest fit at 16-1/2'. The extra foot of material should make getting the cover in place easier and the excess can be tucked and strapped down with the integrated straps. view full answer...
For your 2022 Lance 850 truck camper that measures 18 feet in length the best option for a cover is the Camco Ultraguard part # CAM45770 which provides the best protection in hot and dusty climates and also is easier to fit and install. view full answer...
Like you mentioned, we do not have crossbars anywhere near the 95 inches you need, so unistrut seems fine. You can use something like the Yakima SkyBox 18 Rooftop Cargo Box # Y07336 and it will clamp on just fine so long as the unistrut is no more than 3-1/2" wide x 1-11/16" tall. view full answer...
Crossbars of that length are not available; the longest possible crossbars are the 79 inch Rhino-Rack Vortex Aero Crossbars # RRVA200B-2. view full answer...
I recommend using the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide - 375 lbs # TLA7804-8000. These are a 4 step system that has glow tape on the steps to help with visibility at night, and the adjustable landing gear help stabilize the steps on un-even ground and they'll work for entry heights between 31" and 42" tall. These aluminum steps are light weight and easy to move up and down, as well as remove during travel, so they're perfect for truck campers.... view full answer...
Go To Results